PIXELATOR MINI MK2
A smart, cost-effective lighting control solution, the PIXELATOR MINI MK2 is a compact rack, surface & DIN-rail mountable, eDMX to LED pixel protocol converter capable of outputting up to 128 universes of data in Overdrive Mode.
128-Universe Ethernet to SPI pixel converter for large scale LED installations.
The Pixelator Mini Mk2 is an installation-grade hub that simplifies LED pixel dot and strip control. As part of ENTTEC’s PLink system, it provides 16 Ethernet ports for SPI pixel conversion, handling up to 128 universes of Art-Net, sACN, and ESP with data integrity up to 300m.
Equipped with dual Ethernet ports for daisy-chaining and Power over Ethernet (PoE) support, the Pixelator Mini Mk2 streamlines network setup and power delivery for complex installations.
Connect a PLink Injector to each port to convert control data to SPI protocols, ensuring seamless signal transmission to LED pixel fixtures. Ideal for large projects, the Pixelator Mini Mk2 supports over 20 LED protocols and custom protocols, with firmware updates and configuration available through its localhost web interface. For outdoor use, pair it with an outdoor PLink Injector or our CVC4 dimmers for minimal configuration and extensive control.
ENTTEC are proud to have pioneered the introduction of user-friendly web browser interfaces in the lighting control sector. Just like all ENTTEC network products, simply connect to your PIXELATOR MINI MK2 from anywhere on the same network using your favourite web browser to configure, manage and update your device settings. It’s that simple!
That’s right! Although ostensibly a 96-universe LED controller, the PIXELATOR MINI MK2 will efficiently convert up to 128 universes of DMX-over-Ethernet to PLink pixel data (8U per output), with auto-activation of Overdrive Mode when configured to output more than 6U per port – because you never know when you might need that little bit extra.
Jam-packed with features to make your installation run smoothly. Select any input universe number and assign it to any output port, or reduce your DMX input control channel count by creating pixel groups. Choose from static or DHCP network configurations, and configure pixel ordering with ease to patch any standard fixture type in your lighting controller. The list goes on!
The PIXELATOR MINI MK2 features an internal buffer and sync logic to ensure all eight PLink output ports stay perfectly synchronised, and thanks to ArtSync, multiple devices on your project will always be perfectly synchronised. You can be confident that with an ENTTEC system you can build vast LED matrixes spanning multiple devices without experiencing any jitter, lag or content tearing on the output of your pixels. Put simply, everything works as you’d expect it to.
Control up to 128 universes of pixels (16,384 RGBW / 21,840 RGB / 65,536 W), and output more than 20 different built-in pixel protocols. What’s more, you can output up to two different protocols simultaneously: one using ports 1-4 and the other via ports 5-8. In the event of a missing protocol, our custom feature allows users to create their own protocol for any desired pixel fixture anytime – without having to submit a support request for new firmware.
The PIXELATOR MINI MK2 has been engineered with surge protection for serious 24/7 operation. If your data cabling has a fault that causes a spike in voltage, a heavy-handed installer gives it static shock, or maybe your DMX lines have a lot of electrical noise on them, the issue won’t be passed through the device to your other equipment. Any disturbance is automatically suppressed.
The UL Listed Mark is a tier of UL approval for stand-alone consumables that have undergone rigorous testing by Underwriters Laboratories LLC. UL Listed means the product meets internationally recognised standards for sustainability and safety.
This ENTTEC product also conforms to the following international compliance and safety standards:
Specifications
| Connectors | 1 x Power input (DC Jack), 2 x Ethernet (RJ45), 16 x PLINK output (RJ45) |
| Input voltage | 12-24V DC / PoE IEEE802.3AF |
| Power input | DC jack (12V PSU & international plugs included) |
| Max. power draw | 3.2W |
| Input port | 1 x RJ45 Ethernet / PoE IEEE 802.3af |
| Through port | 1 x RJ45 Ethernet (for daisy-chaining devices) |
| Input protocols | Art-Net, sACN, ESP |
| Output ports | 16 x RJ45 PLink output |
| Output protocol | SPI in PLink data |
| Max. universe output | 128 universes |
| LED indicators | Forward-facing status LED plus network link/activity (integrated into RJ45 ports) |
| Network speed | 10/100Base-T |
| Network configuration | Static / DHCP |
| Configuration & update | Web interface |
| ESD Protection | Resettable fuse & TVS suppression per port |
| Surge Protection | Yes (all ports) |
| Body material | ABS + anodised aluminium |
| IP rating | IP20 |
| Environmental operating temperature | 0°C to 50°C 32°F to 122°F |
| Environmental operating humidity | 5-95% (non-condensing) |
| Cooling method | Convection |
| Mounting | Rack, surface & TS35 DIN rail mountable (clips, screws & powder-coated aluminium ears included) |
| Unit dimensions | 100.5mm x 72.25mm x 34mm |
| Unit Weight | 0.47kg /1.04lbs |
| Shipping Dimensions | 335mm x 265mm x 78mm |
| Shipping Weight | 1.2kg / 2.65lbs |
| Warranty | 3-year return to base manufacturer warranty |
| Compliance | RCM (Aus/NZ), CE / WEEE (EU), UKCA (UK), FCC (USA) |
Resources
PIXELATOR MINI MK2 data sheet
PIXELATOR MINI MK2 user manual
Custom protocol creation guide
EN-Case Installation Guide
Knowledge base & FAQs
PIXELATOR MINI MK2 CAD drawing + dimensions
PIXELATOR MINI MK2 .STEP file
PIXELATOR MINI MK2 hi-res images (27.8mb)
PIXELATOR MINI MK2 firmware v1.0
PIXELATOR MINI MK2 release notes
The PIXELATOR MINI Mk2 can be discovered on your network using our EMU application and ArtPoll.
When upgrading firmware, we strongly recommend first performing a factory reset following the steps in the release notes.
Pre-listed supported protocols*: APA 104, GS8208B, SPXL (16-bit & 8-bit), SK6812, SJ1221 (16-bit & 8-bit), TM1804, TM1812, TM1814, TLC5973 (16-bit & 8-bit), UCS1903, UCS2903, UCS2904, UCS8903 (16-bit & 8-bit), UCS8904 (16-bit & 8-bit), WS2811, WS2812, WS2812B, WS2813, WS2815, WS2818*, 9PDOT (16-bit & 8-bit). *IMPORTANT: If you wish to control a protocol marked with a * and the option to do so is missing in the firmware interface for your product version, please select WS2811 or WS2812b instead for your LEDs to work properly.
Projects featuring the Pixelator system
Get in Touch
Enquire about the Pixelator Mini Mk2
Explore the Pixelator Mini Mk2: Connect with our team to discuss your project needs and let us tailor a solution for you with pricing in 24-48 hours. Contact an expert now or subscribe to our newsletter for the latest updates and insights.
Related Products
Discover the full lighting solution
Explore the full range
of ENTTEC products
FREE pixel mapping software!
Purchase a PIXELATOR MINI and you’ll receive a FREE 16-Universe license for our award-winning ENTTEC LED Mapper (ELM).